An experimental study on thermal decomposition behavior of magnesite

Thermal decomposition of magnesite is investigated by using a TG–MS. Different kinetic methods including Coats–Redfern, Flynn–Wall–Ozawa, and Kissinger–Akahira–Sunose are used to investigate the thermal decomposition kinetics of magnesite. It was observed that the activation energy values obtained by these methods are similar. The average apparent activation energy is found to be about 203 kJ mol^?1. The raw magnesite and its decomposition products obtained at different temperatures are analyzed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). The concentration of functional groups, crystal structure and composition, and apparent morphology of decomposition products were studied in detail. The FTIR, XRD, and SEM analyses showed that magnesite was completely decomposed at 973 K to form MgO.     

One-pot and novel route for the synthesis of 4-substituted-l,2,4- triazolidine-3,5-diones

The efficient and one-pot synthesis of 4-substituted-1,2,4-triazolidin-3,5-dione derivatives(4-substituted urazoles) via combination of triphosgene, substituted anilines, and ethyl carbazate in the presence of cesium carbonate is presented.     

A simple,rapid and effective protocol for synthesis of bis(pyrazolyl)methanes using nickel–guanidine complex immobilized on MCM-41

Research on Chemical Intermediates - In this paper, a rapid, easy and very efficient method for the synthesis of bis(pyrazolyl)methanes has been reported in the presence of nickel–guanidine...     

Wound healing improvement by curcumin‐loaded electrospun nanofibers and BFP‐MSCs as a bioactive dressing

Wound healing, one of the most complex processes of the body involving the cooperation of several important biomolecules and pathways, is one of the major therapeutic and economic issues in regenerative medicine. The present study aimed to introduce a novel electrospun curcumin (Cur)‐incorporated chitosan/polyvinyl alcohol/carbopol/polycaprolactone nanofibrous composite for concurrent delivery of the buccal fat pad‐derived mesenchymal stem cells (BFP‐MSCs) and Cur to a full‐thickness wound on the mouse model. Scaffolds were characterized structurally using scanning electron microscopy (SEM), fluorescence microscopy imaging and Fourier‐transform infrared spectroscopy, and toxicity of the scaffolds was also evaluated after BFP‐MSC seeding by SEM imaging and 3‐(4,5 dimethyiazol‐2‐1)‐2‐5‐diphenyl tetrazolium bromide (MTT) assay. Then, its influence on the wound‐healing process was investigated as a wound dressing for a full‐thickness skin defect in mouse model. Results demonstrated that the designed composite scaffolds have the capability for cell seeding and support their growth and proliferation. Macroscopic and histopathological characteristics were evaluated at the end of the 7 and 14 days after surgery, and their results showed that our designed scaffold groups accelerated the wound‐healing process compared with the control group. Among those, scaffold/Cur, scaffold/Cur/BFP‐MSC and scaffold/BFP‐MSC groups demonstrated more wound repair efficacy. These results indicated that the combined grafts can be used to improve the wound‐healing process, and therefore, the electrospun nanofibers presented in this study, Cur and BFP‐MSC together, were demonstrated to have promising potential for wound‐dressing applications.     

Molecular dynamics simulation of ferronanofluid behavior in a nanochannel in the presence of constant and time-dependent magnetic fields

Journal of Thermal Analysis and Calorimetry - For the first time, double phosphates(V) Zn3Cr4(PO4)6 and Mg3Cr4(PO4)6 were synthesized by non-waste solid-state reaction, performed in the temperature...     

Pressure Improvement on a Supercritical High-Lift Wing Using Simple and Modulated Pulse Jet Vortex Generator

In this paper, an experimental study, aimed at delaying flow separation on a high-lift device using a pulsed blowing excitation method, is reported. The main objective of this investigation was to evaluate a new pulsed jet generation strategy to enhance flow control performance. In these experiments, two types of signal waveform were implemented to produce the unsteady blowing; a simple square-wave excitation signal for the first case, and a burst modulated excitation signal for the second case. The signal modulation was the first time to be used for a fast-switching solenoid valve actuator. Another objective of this study was to evaluate a new arrangement of the jet exit slots, in the form of a vortex generator which was employed for the first time on the high-lift device. For this purpose, a NASA SC(2)-0714 airfoil with a single slotted flap was employed. The vortex generator jets emanated from the shoulder of the trailing-edge flap with excitation frequencies from 40 to 1000 Hz. Pressure distribution around the model and wake total pressure deficit were measured. The results indicated that ejection from vortex generator slot pairs was able to prevent flow separation completely in most conditions. These measurements revealed that the burst modulated excitation signal was accompanied by more aerodynamic improvements and less air consumption relative to the simple pulsed jet excitation signal. In the best flow control mode, the results showed about a 53% increase in the value of the suction pressure peak on the flap and a 38% decrease in drag with a reduction in total pressure loss.

     

A digital implementation of 2D Hindmarsh–Rose neuron

Nonlinear Dynamics - Different architectures and techniques have developed in the neuromorphic field to mimic and investigate the activity of biological neural networks. This paper presents a set...     

Role of recording geometry in the performance of spectral diversity filters with spherical beam volume holograms

We present experimental demonstrations of spectral diversity filters with spherical beam volume holograms for multimodal multiplex spectroscopy. Major properties of filters under diffuse-light illumination are discussed. The comparisons of spectral diversity between the transmission geometry holograms and the reflection geometry holograms are also studied. The results show that there is a trade-off between the degree of the spatial coherence of the source and the spectral diversity of the filter. We also conclude that the reflection geometry holograms have better spectral diversity and less sensitivity to the spatial coherence of the source.     

Comparison between decoherence time for a two-state spin ½ system with its corresponding quantum retrieval period

The evolution of a two-state quantum system (a spin ½ particle) in both the framework of standard quantum mechanics and under the decoherence regime is considered. The former approach on this issue is the well-known quantum flipping process of a dichotomic system subjected to a time-dependent magnetic field. In the latter approach, the Spin-Boson model is utilized to describe the interaction of system with its environment and the Born-Markov master equation is derived to obtain the decoherence time. It is possible to show that under certain conditions, one may find a potential conflict between the predictions of decoherence theory and the result observed in a typical quantum flipping experiment.